If you want to buy a qualified wooden door, you should visit the wooden door manufacturers and see more! More checks in the acceptance of wooden doors! So what are the acceptance considerations for wooden doors? Next for you to answer:
Wooden door acceptance considerations a
The appearance should be beautiful:
Wooden doors and windows of the surface of the paint film should be smooth, bright, no flow, bubbles, wrinkles and other quality defects, there is no corrosion points, dead knots, broken; package door and window sets using wood should be coordinated with the door and window fan of the wood, colour coordination, veneer panels and wood strips can not be a big difference in colour, the tree species should be the same.
Wooden door acceptance considerations
Doors and windows fan should be square, can not warp deformation, doors and windows fan just can be plugged into the door and window frames, and coincide with the door and window frames:
If the door and window fan and frame gap is large, mainly because the installation planing repair is not allowed or the door and window frame and the ground is not perpendicular to the door and window fan can be unloaded to re-planing repair; such as door and window frame is not perpendicular to the frame, should be in the frame plate shims to find straight.
Wooden door acceptance considerations
Hinges should be accurate location, installed firmly:
If the hinge is not on the right, it will lead to the door and window fan and frame set does not match, door and window switch is not smooth. Each hinge can be first screwed down a screw, and then adjust the door and window fan and the frame of the degree of coincidence, adjustment and repair after the error and then tighten all the screws. If the hinge screws are short, or screwed in at once, no screws, or screws screwed diagonally will lead to the door and window fan to play shopping. Should replace the appropriate screws, screws must be straight, screws should be nailed into the first 1/3 of the rest to be screwed in.
Wooden door acceptance considerations four
Door locks should be opened and locked smoothly, the lock on the door and door frame of the two parts to match:
The lock is not properly installed, which will cause the door to open and close without difficulty. The latch plate should be removed, the tongue groove should be repaired with a chisel, and the position of the latch mouth of the door frame should be adjusted before installation. In addition, the opening direction of the door should also meet the requirements.
Wooden door acceptance notes five
Door and window sets should have base material inside:
Window sets made of joinery or density board, should be fixed in the window frame base plate on the keel, and then nail lines; door sets are suitable for wood made of frame, planing, planing straight, and then assembled and moulded to be installed on the wall, and then covered with the base plate and veneer panels. Knock with your hand on the side panels of the door and window sets, if the sound of hollow drums, it means that the bottom layer is not padded joinery and other grass-roots panels, should be folded to redo.